FLOW SENSOR SSK
DP-K-011-000025DESCRIPTION
The SSK flow sensor is used to monitor lubrication points in centralized lubrication systems. Suitable for oils and fluid greases from 50 mm³.
Technical Data
Detectable dosing quantities
≥ 50 mm³
Cycle frequency
1 pulse per 1s
Viscosity (oil)
10 to 2000 mPas
Lubricant class (grease)
NLGI 0 to 00
Operating pressure
max. 50 bar
Operating temperature
dependent on medium –20 to +70 °C
Mechanical data
Height x width x depth
35 x 45 x 25 mm (housing)
47 x 81 x 25 mm (total)
Housing material
AlMgSi1 E0/EV1 (anodized aluminium)
Mounting
M4 screws (two holes)
Medium connection
2x union screw M8x1 for Ø 4 mm
Installation type
for direct installation in the lubrication point supply line: any
for small flow rates: preferably vertically in the direction of flow with medium outlet at the bottom
Protection class
IP 67 (with corresponding plug connector)
Electrical data
Power supply
12–24 V DC ± 15 %
Switching function
PNP normally open contact
Output current
max. 200 mA (permanently short-circuit proof)
Current consumption
approx. 4 mA at 24 V DC
Connection
plug connector M8x1
Pin assignment
1(br) + / 3(bl) - / 2(sw) output with reverse polarity protection