PROPORTIONAL DOSING VALVE PDV03
DP-D-005-000003- Dosing range 0.01–0.5 cm³
- No pneumatic connection needed
- Extremely process-safe dosing due to electronic monitoring
- Flexible, easily adjustable metering quantities and speeds
- Independent of viscosity, pressure and temperature
Application
With the PDV03 proportional dosing valve, continuous as well as spot application of oils and greases up to a volume of 0.5 cm³ is possible.
Description
The PDV03 proportional dosing valve is a split system and has no integrated electronics. The resulting more compact size allows it to be mounted directly at the point of use. In addition, the PDV03 operates electromechanically and does not require a pneumatic connection.
The separate electronic control can be mounted flexibly with a permissible cable length of 3–20 meters.
The control takes place via the D+P dosing system DS.
Advantages
The freely selectable metering volume can be infinitely adjusted and applied at variable speed with pinpoint accuracy or over a wide area.
In the case of automated dispensing of several different positions on a workpiece, each position can be dispensed individually. This means that entire wetting profiles can be processed within one dispensing process.
The PDV03 is viscosity-, pressure- and temperature-independent and ensures extremely process-reliable metering thanks to electronic monitoring of the valve piston by means of an encoder.
Technical Data
Mechanical data
Weight
2 kg
Width x height x depth
85 x 59.5 x 335 mm
Max. pumpable viscosity
oils and greases up to NLGI class 3
Dosing quantity
0.01–0.5 cm³
Medium inlet pressure
5–30 bar depending on application
Compressed air
4–6 bar
Compressed air quality
dried, filtered, oil-free
Electrical data
Supply voltage
24 V DC
Fuse protection of the supply line
10 A
Max. power consumption
100 W
Quantity
1 inlet / 5 outlets
Type
outlets open collector with pull-up resistor to 24 V DC
Load
input 24 V DC/100 mA; outlets max. 10 mA to GND
Usage
inlets: switching of the control valve; outlets: motorready, motoractive, overtemperature
Supply voltage +24 V DC
min. –10 %, max. +10 %
Current consumption supply voltage +24 V DC
during dosing typically 3 A; at standstill 2 A; peak current 4 A
EMC resistance
according to EN 61000-6-2:2001 (industrial area)
Connection technology
17W2 Sub-D connector (supply, digital I/O) with mixed contacts; 9-pin Sub-D connector (RS485);
external thread M16x1.5 nipple material inlet; Male thread G1/4" nipple material outlet
Environmental conditions
Storage temperature
10–50 °c
Operating temperature
15–40 °c
Humidity
50–70 %, no condensation
Operation in closed rooms. Protect from direct sunlight, dust and moisture. Installation altitude, maximum 2000 meters above sea level.
ACCESSORIES
Further accessories & spare parts on request! Also searched as: PDV 03